The ARC Smart-Closer closes the cavity around window and door openings. The rigid PVCu profile is insulated with expanded polystyrene insulation (EPS) as standard, or extruded polystyrene (XPS) where enhanced thermal properties are required.
Smart-Closer helps prevent moisture, mould and staining from around windows and doors
- Closes cavity around window and door reveals
- Prevents cold bridging
- Insulated with expanded polystyrene (EPS) as standard
- For cavity widths from 50mm to 150mm
- Single flange available for check reveal details
This product is sold in pack quantities, the pack sizes are on the product dropdown for easy selection.
ARC Smart-Closer is insulated with expanded polystyrene which conforms to BS EN 13163:2001 Thermal Insulation Products for Buildings, Factory Made Products of Expanded Polystyrene (EPS).
The ARC Smart-Closer is available for speedy delivery.
The ARC Smart-Closer is easily installed. Simply cut the jamb profile
to the height of the window or door opening plus 75mm to allow the
bottom edges to drop into the cavity below the sill.
Once the jamb sections are installed, measure the required width for the sill section and cut a length to butt tightly to the jamb sections. If a longer length than 2.4m is required, see below
Option 1 (First Fix): As above and build in the jamb sections as the
brickwork progresses using ARC Brick Ties* (1 every 225mm). Ties are
not required on the sill section, simply hold in place with an adhesive
or nail to block. *ARC Brick Ties are sold separately and can be purchased by clicking this link
Option 2 (Second Fix): Cut sections to required size as above and
simply push fit once the openings are formed. Sections can be
secured by nailing to block or using a suitable adhesive.
Where a longer length than the supplied 2.4m is required, the following jointing
method should be used.
Using an appropriate saw, remove 150mm of the
plastic profile only, then push the exposed insulation into the next length of plastic
ARC’s wealth of technical experience ensures that the best solution can be identified from their comprehensive range of products. All fire barriers and cavity closers are manufactured to NHBC requirements and hold LABC accreditation. Operating within an ISO 9001 Quality Management System and ISO 14001 Environmental Management System, all products are manufactured to the highest standards.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.